Want advice on which safe is best for your needs. Or on how to install a safe.
Lost key, Lost safe combination, touch up paint. We can help. Need help
opening your safe try some of the Safe trouble shooting tips. We are a bonded
member of the national locksmith organization. And have 23 years experience In
the trade. Please enter you email address and any questions you have. We will
respond with an answer ASAP. Trouble shooting tips Inclusive Model Numbers:
A1Q8EBD/A1Q8EWD/A1Q12EWD/A1Q12EBD/A125EA. General Operating Instruction Your
safe is initially locked when you first take it out from the packaging. To
open, press 1-5-9-A and open the door by turning the handle (turn knob in
Model A125EA). See also OPENING THE SAFES section below. HOW TO SET YOUR OWN
PERSONAL CODE (maximum 8 digits) 1. Locate the red jutting button on the back
of the safe door near the hinges 2. Press the button and release it. You
should hear a beep. If you don’t, install the battery (see �To Change the
Batteries� instruction below). 3. Enter between three (3) to eight (8)
digits code number that you want to use as a password followed by the letter
�B� (Ex. 1-2-3-B). 4. Your new code is now ready for use. Test for usage
by opening your safe: Open safe sequence: Enter your code � Press A (Ex.
1-2-3-A) � Pull handle OPENING YOUR SAFE Your Anti-Theft� safe has an
extra protection feature on the handle. The door handle is a bit tricky to
operate if you don’t know how to use them; thus opening the safe door
requires knowledge only the owner of the safe possesses. Observe the following
If the wrong code has been entered once, the safe will lock itself for 20
seconds. The next wrong attempt will lock it for over 5 minutes. Continued
wrong attempts 24 hours General Turning Sequence Instruction NOTE SAFE MODEL
5054/5055/5059/5080/5081/5084/5111/5190/5195/5575/5700/5702. Combinations
consist of FOUR (4) positions (numbers). BEFORE YOU START Before you begin,
please clear all settings by turning the dial CLOCKWISE (to the right) three
times. We also recommend to try the procedure with your safe door open first.
Then follow these steps: TURNING SEQUENCE 1. Start the dial on 0 (zero). 2.
Turn the dial to the RIGHT, passing your first combination number FOUR (4)
times and stopping at that number on the fifth time around. 3. Turn the dial
to the LEFT, passing your second combination number TWO (2) times and stopping
at that number the third time around. 4. Turn the dial to the RIGHT, passing
your third combination number ONE (1) time and stopping at that number the
second time around. 5. Turn the dial to the LEFT, to the last combination
number and STOP. 6. Insert the key in the cylinder lock and turn RIGHT to
open. Your safe should now be opened. PLEASE do not remove the serial number
tag or model number tag or any tag from the Brink's safe that you buy or may
already own. Removing the tag will make it difficult for our customer service
representatives to assist you in a timely manner.

 
A1-Locksmith Home  
Home | Contact Us | Product Line | Return Policy | Privacy Statement | Product Line | Burglary Safes and Fire safes | Burglary Safes | cash Boxes | Depository Safes | Fire Data Media Safes | Floor Safes | Gun Safes | Hand Gun Safes | High Security Safes and Vault door | Hotel Residential Safes | Key Cabinet, key boxes | Mail Boxes | Sentry Safes | Wall Safes | Link Page