:. barnstead-electrothermal-ertco-harvey-lab line-labindustries-linear-ohaus-pmc-stem-thermolyne-turner .:

| 2008 Product Catalog | Hot Plates
Thermolyne* Super-Nuova* Digital Ceramic Top Hot Plates 
 

HP131720-33	HP131720-33Q	HP131724	HP131724Q	HP131725	HP131725Q	HP133420-33Q
HP133424Q	HP133425Q	HP133730-33	HP133730-33Q	HP133734	HP133734Q	HP133735
HP133735Q

Top of the Line Control • Warning system deters accidental contact with hot surface • Remote probe allows for accurate readings of solution temperature to 0.1°C for temperatures below 100°C • User-adjustable over-temperature protection prevents runaway temperature conditions • 24 month warranty Operation • Easy-to-read digital displays indicate temperature settings adjustable in 1°C increments. After pressing “SET” and adjusting the setpoint the display will show actual reading after 3 seconds. • Designed to provide superior control of temperatures below 100°C. • Ideal for cold room applications. Can be used in a 0 to 27°C, 80% relative humidity, non-condensing environment. • User-programmable preset buttons allow for up to four often-used temperatures to be recalled at the touch of a single button. Ideal for labs that perform repetitive procedures. • Microprocessor-controlled feedback technology maintains consistent, repeatable temperature. • Hot surface alert safety systems protect from accidental burns. Bright red warning lights signal when heating surface is above 50°C (122°F). Unit display flashes “HOT” - “OFF” when heating is turned off, until heating surface is below a cool 50°C. • Walk-away timer shuts off heating after a preset user-defined interval. • Independently adjustable over temperature protection circuit limits top plate temperature and prevents runaway conditions. • Calibration mode allows remote probe to be calibrated to external standards and at any temperature the user selects. Product Description • Rugged low-profile cast aluminum body provides stability and durability. Unit design provides protection of internal components in case of accidental spillage. • Available in 7” X 7” and 10” X 10” sizes. • Accommodates sample weights to 35 lb. (15.9 kg) on the 10” x 10” models, 25 lb. (11.3 kg) on 7” x 7” models. • Integral ring-stand holder accommodates 0.5” (1.3 cm) diameter support rod. • Unique, single knob design controls heating. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob is then locked out to avoid accidental changes. • RS232 port enables you to output time count, temperature setpoint, top surface/remote probe temperature to a printer or computer. • All models supplied with 6” type K probe, detachable cord and retention bracket that prevents cord from becoming accidentally removed. Choose from Ceramic or Aluminum Top: • Rugged aluminum surface provides uniform heat distribution and added durability to sustain point impacts that might break ceramic or glass surfaces. • Seamless reflective white ceramic top enhances sample visibility and provides an easy-to-clean and alkali/acid resistant surface.