 Lindberg/Blue M* 1700°C High Temperature Independent Control Tube Furnaces
|
|
7219-2134-001 7219-2134-002 7219-2134-003 7219-2134-011 7219-2134-012 7219-2134-013 7219-2147-001 7219-2147-002 7219-2147-003 7219-2147-011 7219-2147-012 7219-2147-013 CC59256PBCOM2CKTC CC59256PBCOMC CC59256PCOM2CKTC CC59256PCOMC STF54434C STF54454C
High temperature tube furnaces achieve excellent temperature uniformity at 1700°C with rapid heat-up, recovery and cool-down.
Moldatherm® graduated density insulation adds to safety and performance by forming enhanced insulation protection between the high temperature chamber and exterior cabinet surface.
Moldatherm graduated density insulation, combined with molybdenum disilicide heating elements, provide superior radial and linear temperature uniformity with resistance to thermal shock.
The independent digital temperature control (ordered separately) has multiple programmable segments useful for a wide range of applications.
Features
Heating elements with unique right angle bend and sidewall mounting deliver exceptional energy release, fast heat-up and recovery, reduced thermal process cycle time, and cost savings through quicker throughput and energy efficiency.
Heating elements tolerate rapid cycling over extended periods; elements are easily replaceable without the need to match resistance values.
Heating elements are sidewall mounted to protect integrity of chamber roof; roof penetrations are avoided.
Type “B” thermocouples assure accurate temperature measurement and long thermocouple life; 10' compensated lead wire with polarized plug included.
Moldatherm end vestibules accept 3" O.D. process tube (customer supplied).
Optional Moldatherm vestibules permit operation with 1", 2" and 3" O.D. process tubes for increased versatility.
Double shell construction and convection cooling design reduces exterior surface temperature.
Removable louvered panels provide easier access to heating elements and thermocouple.
Applications
Atmosphere Processing.
Sintering.
Annealing.
Crystal Growing.
Heat Treating.
1700°C Controller, Programmable, With Communications Lindberg/Blue M 1700°C Programmable
Controllers provide multiple programs and multiple segments for ramp (up and down) and dwell (timed hold) temperature control.
The controller visually displays ramp rate, dwell time, program segment and percent power output.
A holdback feature allows the operator to set a “process vs setpoint” temperature value which, when exceeded, holds the program to allow the process to catch up.
The controller includes a selectable self-tuning feature which sets the best PID settings for the thermal process.
Two digital displays simultaneously indicate actual temperature and setpoint temperature.
High limit overtemperature protection is standard.
The control console includes a circuit breaker, power module, transformer and cooling fans.
Controllers include RS485 data port (communications card and port) for connection to remote computer, allowing modification, interrogation and data transfer of all instrument control and configuration parameter.
Up to 30 units can be connected to one PC.
Software is not included, but is available as an option.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with “B” suffix designation.
Protects furnace and load in the event of primary control circuit failure.
Overrides main controller and shuts off power to furnace if high limit is reached.
Manual re-set required for safety.
Operates via magnetic contacts through signal from independent thermocouple.
Vestibules
Optional Moldatherm® vestibules permit operation with 1", 2" and 3" O.D. process tubes for increased versatility.
Two vestibules are required for each furnace.
One 3" vestibule set is included and installed with each furnace.
Moldatherm Sleeves
Tube sleeves may be placed over customer supplied process tubes to reduce thermal shock to the process tube.
Sleeves must be ordered separately.
All tube sleeves are 3" long.
| QTY |
PRODUCT DESCRIPTION |
OUR PRICE |
| |
all prices shown are in USD
|
|
|
|
STF54454C-EA
Lindberg/Blue M* 1700°C high temperature independent control tube furnace, 208/240v, 50/60hz, 10000w
|
$22,829.30
$26,858.00 |
|
|
STF54434C-EA
Lindberg/Blue M* 1700°C high temperature independent control tube furnace, 208/240v, 50/60hz, 5000w
|
$12,574.90
$14,794.00 |
|
|
CC59256PCOMC-EA
Lindberg/Blue M* controller, digital/prog, 208/240v, 50/60hz
|
$6,289.15
$7,399.00 |
|
|
CC59256PBCOMC-EA
Lindberg/Blue M* controller, digital/prog/overtemp controller, 208/240v, 50/60hz
|
$7,472.35
$8,791.00 |
|
|
7219-2134-001-EA
Lindberg/Blue M* sleeve, 1", STF4434C
|
$222.70
$262.00 |
|
|
7219-2134-013-EA
Lindberg/Blue M* sleeve, 1", STF4454C
|
$250.75
$295.00 |
|
|
7219-2134-002-EA
Lindberg/Blue M* sleeve, 2", STF4434C
|
$223.55
$263.00 |
|
|
7219-2134-012-EA
Lindberg/Blue M* sleeve, 2", STF4454C
|
$233.75
$275.00 |
|
|
7219-2134-003-EA
Lindberg/Blue M* sleeve, 3", STF4434C
|
$223.55
$263.00 |
|
|
7219-2134-011-EA
Lindberg/Blue M* sleeve, 3", STF4454C
|
$250.75
$295.00 |
|
|
7219-2147-001-EA
Lindberg/Blue M* vestibule, 1", STF4434C
|
$308.55
$363.00 |
|
|
7219-2147-013-EA
Lindberg/Blue M* vestibule, 1", STF4454C
|
$331.50
$390.00 |
|
|
7219-2147-002-EA
Lindberg/Blue M* vestibule, 2", STF4434C
|
$308.55
$363.00 |
|
|
7219-2147-012-EA
Lindberg/Blue M* vestibule, 2", STF4454C
|
$307.70
$362.00 |
|
|
|
|
 |