 Lindberg/Blue M* 1200°C Split-Hinge Tube Furnaces
|
|
CC58114A CC58114BA CC58114BC CC58114C CC58114PA CC58114PBA CC58114PBC CC58114PC CC584343PBC CC584343PC CC58434BC CC58434C CC58434PBC CC58434PC HTF55122A HTF55322A HTF55322C HTF55342C HTF55347C HTF55667C VFS551 VFS553 VFS556
The split-hinge design permits easy observation, fast cooling, convenient placement of the process tube and overall ease of operation.
All models can be used with a variety of ceramic, quartz or alloy process tubes (customer supplied), diameters to 6" depending on model.
One set of tube adapters is included with each model.
Features
Designed for horizontal or vertical operation.
Patented Moldatherm® LGO™ heating element modules for superior radial and linear temperature uniformity, fast heat-up and cool-down.
Long-life, energy efficient elements require little or no maintenance.
Unique cabinet design achieves lower exterior surface temperature.
Heat reflecting element support assembly creates two highly effective insulating air spaces.
Compact cabinet with high temperature resistant painted finish.
Accepts interchangeable Moldatherm tube adapters.
Long-life Platinel® II thermocouple(s) with 10' compensated lead wire and polarized plug.
Single Zone and Three Zone
Lindberg/Blue M 1200°C split hinge tube furnaces are configurable for horizontal or vertical use.
Choose from single zone models of 12" and 24" heated lengths, and three zone models of 24" to 36" heated lengths.
Furnaces use independent digital temperature control modules (ordered separately) which are available in standard or programmable options.
Three Zone Models
Three independent power circuits (zones) with independent thermocouples for control references.
Full adjustment of each zone over entire operating range to 1200°C.
Center zone uniformity achieved and operating length maximized through adjustable profiling of end zones by independent controller.
Temperature uniformity achieved with independent setpoint of end zones higher or lower than center.
Applications
Annealing.
Crystal Growing.
Calibration.
Heat Treating.
Single Zone
1200°C Digital, Single Setpoint Controller
Control console includes advanced microprocessor- based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack.
Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint.
May be configured to display temperature in either °C or °F.
1200°C Digital Single Program, Multiple Segment Programmable Controller
Control console includes advanced microprocessor- based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor- based PID control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint.
May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with “B” suffix designation.
Protects furnace and load in the event of primary control circuit failure.
Overrides main controller and shuts off power to furnace if high limit is reached.
Manual re-set required for safety.
Operates via magnetic contacts through signal from independent thermocouple.
Optional RS485 Digital Communications Port
RS485 Digital communications port available as an option.
Allows controller to be connected to a PC for remote monitoring and control of the furnace.
Up to 30 units can be connected to one PC.
Three Zone
1200°C Three Zone Controller
Control console includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone.
Includes three microprocessor-based PID controls (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint.
May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with “B” suffix designation.
Protects furnace and load in the event of primary control circuit failure.
Overrides main controller and shuts off power to furnace if high limit is reached.
Manual re-set required for safety.
Operates via magnetic contacts through signal from independent thermocouple.
Available system on all three zone controller varieties.
Optional RS485 Digital Communications Port
RS485 Digital communications port available as an option.
Allows controller to be connected to a PC for remote monitoring and control of the furnace.
Up to 30 units can be connected to one PC.
1200°C Three Zone Single Program, Multiple Segment Programmable Controller for Center Zone
Control console includes advanced microprocessor- based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone.
Center Zone
One microprocessor-based PID programmable.
control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint.
End Zones
Two microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint which mimic the programmed profile of the center zone controller, but allow an offset up to 100°C (+/- 50°C).
Offset is digitally displayed.
1200°C Three Zone Single Program, Multiple Segment Programmable Controllers
Control console includes advanced microprocessor- based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone.
Includes three microprocessor-based PID programmable controllers (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control.
Built-in adjustable high limit overtemperature protection.
Simultaneous LED display of actual temperature vs. setpoint.
May be configured to display temperature in either °C or °F.
Accessories
Moldatherm® Tube Adapters (each sold separately)
One set (2) of tube adapters provided with each Lindberg/Blue M furnace.
Interchangeable individual tube adapters which allow alternative size process tubes are available.
Floor Stand, For Vertical Installation
The optional Floor Stand is required to support HTF Series.
Tube Furnaces in a vertical configuration.
Floor stands include all mounting hardware.
| QTY |
PRODUCT DESCRIPTION |
OUR PRICE |
| |
all prices shown are in USD
|
|
|
|
HTF55122A-EA
Lindberg/Blue M* 1200°C split-hinge tube furnace, 1 zone, horizontal/vertical, 120v, 50/60hz, 1330w
|
$2,229.55
$2,623.00 |
|
|
HTF55322A-EA
Lindberg/Blue M* 1200°C split-hinge tube furnace, 1 zone, horizontal/vertical, 120v, 50/60hz, 2675w
|
$2,669.00
$3,140.00 |
|
|
HTF55322C-EA
Lindberg/Blue M 1200°C split-hinge tube furnace, 1 zone, horizontal/vertical, 208/240v, 50/60hz, 2675w
|
$2,669.00
$3,140.00 |
|
|
HTF55342C-EA
Lindberg/Blue M* 1200°C split-hinge tube furnace, 1 zone, horizontal/vertical, 208/240v, 50/60hz, 5440w
|
$3,160.30
$3,718.00 |
|
|
HTF55667C-EA
Lindberg/Blue M* 1200°C split-hinge tube furnace, 3 zone, horizontal/vertical, 208/240v, 50/60hz, 11760w
|
$5,015.85
$5,901.00 |
|
|
HTF55347C-EA
Lindberg/Blue M* 1200°C split-hinge tube furnace, 3 zone, horizontal/vertical, 208/240v, 50/60hz, 5355w
|
$3,845.40
$4,524.00 |
|
|
CC58114C-EA
Lindberg/Blue M* controler, digital, 208/240v, 50/60hz, 30a
|
$2,051.05
$2,413.00 |
|
|
CC58114PC-EA
Lindberg/Blue M* controler, digital/prog, 208/240v, 50/60hz, 30a
|
$2,746.35
$3,231.00 |
|
|
CC58114A-EA
Lindberg/Blue M* controller, digital, 120v, 50/60hz, 30a
|
$2,051.05
$2,413.00 |
|
|
CC58434C-EA
Lindberg/Blue M* controller, digital, 208/240v, 50/60hz, 20/30/20a
|
$6,006.10
$7,066.00 |
|
|
CC58434BC-EA
Lindberg/Blue M* controller, digital/overtemp control, 208/240v, 50/60hz, 20/30/20a
|
$7,269.20
$8,552.00 |
|
|
CC58114BC-EA
Lindberg/Blue M* controller, digital/overtemp control, 208/240v, 50/60hz, 30a
|
$3,292.90
$3,874.00 |
|
|
CC58114PA-EA
Lindberg/Blue M* controller, digital/prog, 120v, 50/60hz, 30a
|
$2,746.35
$3,231.00 |
|
|
CC584343PC-EA
Lindberg/Blue M* controller, digital/prog, 208/240v, 50/60hz, 20/30/20a
|
$8,114.95
$9,547.00 |
|
|
CC58434PC-EA
Lindberg/Blue M* controller, digital/prog, 208/240v, 50/60hz, 20/30/20a
|
$6,723.50
$7,910.00 |
|
|
CC58114PBA-EA
Lindberg/Blue M* controller, digital/prog/overtemp control, 120v, 50/60hz, 30a
|
$3,896.40
$4,584.00 |
|
|
CC584343PBC-EA
Lindberg/Blue M* controller, digital/prog/overtemp control, 208/240v, 50/60hz, 20/30/20a
|
$9,263.30
$10,898.00 |
|
|
CC58434PBC-EA
Lindberg/Blue M* controller, digital/prog/overtemp control, 208/240v, 50/60hz, 20/30/20a
|
$7,873.55
$9,263.00 |
|
|
CC58114PBC-EA
Lindberg/Blue M* controller, digital/prog/overtemp control, 208/240v, 50/60hz, 30a
|
$3,896.40
$4,584.00 |
|
|
VFS551-EA
Lindberg/Blue M* floor stand, HTF55122A
|
$1,363.40
$1,604.00 |
|
|
VFS553-EA
Lindberg/Blue M* floor stand, HTF55322A, HTF55322C, HTF55342C, HTF55347C
|
$1,363.40
$1,604.00 |
|
|
VFS556-EA
Lindberg/Blue M* floor stand, HTF55667C
|
$1,325.15
$1,559.00 |
|
|
|
|
 |